Skip to content

Home Automation in Palm Beach County

K&J Electrical Solutions installs smart lighting, smart switches and sensors, and ties them together with integrated control, for homes across Palm Beach County. The electrical side decides whether it works, since many smart switches need a neutral wire and a sound circuit. Family-owned and owner-operated, phone answered 24/7 at (561) 777-9982.

License EC13016308 Answered 24/7

What's Included

Every home automation job covers these 7 points, done by Jake or Kevin themselves.

  • Smart lighting, including dimmers and controls that suit the bulbs and fixtures on the circuit
  • Smart switches, installed in boxes that have the wiring they need
  • Sensors that control lighting, placed and wired where they work
  • Integrated control that ties the lights, switches and sensors together
  • A check of the switch boxes, circuits and panel before any device goes in
  • Panel surge protection for the electronics, where you want it
  • Permit and inspection where required

Signs You Need It

If you notice any of these, it is time to call about home automation.

  • You want lights that follow a schedule, or turn on when someone enters a room
  • A smart switch or dimmer you bought will not work because the box has no neutral wire
  • Lights flicker or hum with the dimmers or smart switches you have
  • Several apps or controllers run different parts of the house and you want one setup
  • You are remodeling or building and want switch locations and control wiring planned before the walls close
  • Entry, hallway or outdoor lights stay on when no one needs them

Ready to talk about home automation? You'll deal with Jake or Kevin directly.

What does home automation mean for an electrician?

K&J Electrical Solutions installs smart lighting, switches and sensors, tied together with integrated control. Behind every one of those devices is ordinary electrical work: a box that can hold it, a circuit that can carry it, the right wires at the switch and power that stays clean. When any of those is missing, a smart device either will not work or will not work reliably.

That is why the electrician comes first. A smart device is only as dependable as the wiring behind it.

Which parts of a smart home need electrical work?

Most smart-home projects come down to four things:

  • Smart lighting. Dimmers and controls that replace or sit alongside regular switches. LED lighting is picky about dimmers, so the control has to suit the bulbs and fixtures on that circuit.
  • Smart switches. These replace the wall switch and, in most cases, need power at the switch, which means a neutral wire in the box.
  • Sensors. Sensors that turn lights on and off need to be placed where they can see the room and wired or powered correctly.
  • Integrated control. This ties the lights, switches and sensors into one setup, so they work together instead of as separate gadgets.

Do smart switches need a neutral wire?

Many do. A smart switch keeps its electronics running even when the light is off, and it takes that power from the neutral. Older homes often wire a switch with only the hot and switched wires, so there is no neutral in the box.

The National Electrical Code (Section 404.2(C)) requires a neutral at many switch locations in newer wiring, with exceptions, including for replacement switches in existing homes where adding the wire would mean damaging finished walls. So a newer home often has what a smart switch needs, and an older home has to be checked box by box. When a box has no neutral, the choices are to run one where the walls allow, to use a device made to work without one, or to control that light another way.

Will my smart devices work together?

Not automatically. Smart devices speak different standards, and a switch from one maker may not talk to a sensor from another. Matter is a standard from the Connectivity Standards Alliance, built so devices from different makers can work together across platforms, but support still differs from device to device and from feature to feature.

The practical advice is to decide what you want the system to do, and to ask before you buy. Ask Jake or Kevin about a specific brand or system at (561) 777-9982 before you put it in your cart.

When is the best time to add home automation?

Before the walls close. During a remodel or a new construction build, the neutrals, switch locations, sensor positions and any control wiring can be planned and run while the framing is open. Adding them later may mean opening finished drywall.

If the house is already finished, a panel visit or a rewiring project is the next best time, because the boxes and circuits are being looked at anyway. Lighting work, such as new recessed lights or ceiling fans, is another natural point to choose the controls.

What protects smart-home electronics?

Smart devices are electronics, and Florida’s lightning and grid surges are hard on them. A surge protector at the main panel helps guard every circuit, and plug-in protectors near a home office or media room add a second layer. No device can promise protection from a direct lightning strike, but a panel-mounted device reduces the damage from nearby strikes and grid events.

Who installs home automation in Palm Beach County?

K&J Electrical Solutions does. We are a family-owned, owner-operated electrician in Palm Beach County, run by Jake and Kevin, and the two of them do the work themselves. You deal with the owners from the walkthrough to the final test, and you hear the plan before work starts. We work across the county, including Jupiter, Palm Beach Gardens, Boca Raton, Wellington, West Palm Beach and Delray Beach. Our phone is answered 24/7 at (561) 777-9982, and it takes texts too, or you can request an estimate.

Sources

  • EC&M, The Apprentice’s Guide to Article 404, July 11, 2024 (switch neutral rule, Section 404.2(C), and its exceptions): ecmweb.com
  • National Fire Protection Association, NFPA 70, National Electrical Code: nfpa.org
  • Connectivity Standards Alliance, The Connectivity Standards Alliance Unveils Matter, Formerly Known as Project CHIP: csa-iot.org

Home Automation Questions

Do smart switches need a neutral wire?

Many do, because their electronics draw a little power even when the light is off. The National Electrical Code (Section 404.2(C)) requires a neutral at many switch locations in newer wiring, but older homes often have none at the switch. K&J Electrical Solutions can check each box and tell you what your switches need.

Can smart switches go into an older Palm Beach County home?

Often, yes, but it depends on the wiring in each switch box. If a box has no neutral, the options are to run one where the walls allow, to pick a device made to work without one, or to control that light another way. K&J Electrical Solutions looks at the boxes first.

Will smart devices from different brands work together?

Not automatically. Matter is a standard from the Connectivity Standards Alliance meant to let devices from different makers work together, but support differs from device to device. Ask Jake or Kevin about a specific system before you buy it. Call (561) 777-9982.

Should I use smart bulbs or smart switches?

A smart bulb needs power at all times, so the wall switch has to stay on. A smart switch controls the whole fixture and works with ordinary bulbs. Smart bulbs and separate dimmers do not always mix, so check the bulb maker's instructions. K&J Electrical Solutions can help you choose.

Does a smart home need surge protection?

It is worth considering. Smart devices are electronics, and surges from lightning or the utility can damage them. A surge protector at the panel helps guard the whole home, and plug-in protectors add a second layer. No device can promise protection from a direct lightning strike.

Is it easier to add home automation during a remodel or new build?

Yes. With the walls open, neutrals, switch locations, sensor positions and control wiring can be planned and run before drywall goes up. Adding them later can mean opening finished walls. K&J Electrical Solutions can walk through your plans before the walls close.

Still have a question? Ask the owners directly.

Need help right now?

Call or text (561) 777-9982. We answer 24/7, and you get Jake or Kevin, not a call center.

Power out, burning smell, sparking outlet or a breaker that won't reset? Call now.

Not urgent? Request a free estimate.

We typically reply within one business hour.

* Required. We only use your details to answer your request.

Other ways to reach us

K&J Electrical Solutions logo

K&J Electrical SolutionsBoynton Beach, FL

Open our Facebook page Recommend us on Nextdoor
Address
K&J Electrical Solutions
9377 Longmeadow Cir, Boynton Beach, FL 33436
Service area
Palm Beach County, FL
License
Licensed and insured Florida electrical contractor EC13016308
K&J Electrical Solutions logo

We Answer 24/7

Need an electrician? Jake or Kevin picks up, day or night.

Emergency service
24/7, every day
Service area
Palm Beach County
FL license
EC13016308
Call (561) 777-9982