Skip to content

EV Charger Installation in Palm Beach County

K&J Electrical Solutions installs home EV chargers across Palm Beach County. A typical install is a Level 2 charger on a dedicated 240-volt circuit, and we check your panel first so the charger runs safely alongside your AC and other loads. Family-owned and owner-operated, phone answered 24/7.

License EC13016308 Answered 24/7

What's Included

Every ev chargers job covers these 7 points, done by Jake or Kevin themselves.

  • Panel capacity check and load calculation
  • Dedicated 240-volt circuit and breaker sized to your charger
  • Hardwired Level 2 charger or a NEMA 14-50 outlet for plug-in units
  • Garage, carport and driveway installations with outdoor-ready equipment
  • Permit and inspection where your city or county requires them
  • Load management or panel upgrade options when capacity is tight
  • Testing the circuit and charger before handoff

Signs You Need It

If you notice any of these, it is time to call about ev chargers.

  • You bought or ordered an electric or plug-in hybrid vehicle
  • Charging from a standard outlet can't keep up with your driving
  • You're relying on an extension cord to charge
  • You're adding a second EV to the household
  • You want a charger in place before listing or renting a home

Ready to talk about ev chargers? You'll deal with Jake or Kevin directly.

What does EV charger installation involve?

Installing a home EV charger means adding a dedicated 240-volt circuit from your electrical panel to the spot where you park, then mounting and connecting a Level 2 charger or a matching outlet. The wire, breaker and outlet are sized to the charger’s rating, and the work is permitted and inspected where your city or county requires it.

The details depend on your home. A garage that shares a wall with the panel is a short, simple run. A detached carport, a driveway charger or a condo parking space can mean a longer run, conduit outdoors and more planning. That is why an electrician should look at the panel and the route before quoting.

Do I need a Level 1 or a Level 2 charger?

Level 2 charging is the practical choice for most drivers, because it can refill a typical day of driving overnight, while a standard 120-volt outlet (Level 1) adds only a few miles of range per hour.

Level 1 can be enough for a plug-in hybrid or for someone who drives very little. For a full battery-electric car, most owners find Level 2 worth it. Level 2 chargers come in hardwired and plug-in versions. A hardwired unit connects directly to the circuit and is often the better choice outdoors. A plug-in unit uses a 240-volt outlet such as a NEMA 14-50 and can be swapped later. Either way, the outlet or charger has to match the circuit, and the circuit has to match what your panel can supply.

Is my panel big enough for an EV charger?

Before any charger goes in, the key question is whether your electrical panel has room for a large new load. A Level 2 charger can draw as much power as a central air conditioner, and it often runs for hours at a time.

In Florida, that load sits on top of air conditioning that runs most of the year, a pool pump, and often an electric water heater and dryer. A load calculation shows how much capacity is left. If the panel is close to its limit, there are options: a lower charging setting, a load management device that shares capacity between the charger and other loads, or a panel upgrade that adds headroom for the charger and for future additions such as a generator.

How do Florida heat, rain and salt air affect a charger?

Florida weather makes equipment choice and placement matter more than in many states. Outdoor chargers and outlets need enclosures built for rain and direct sun, with in-use covers and sealed connections. Within a few miles of the coast, salt air corrodes exposed metal, so corrosion-resistant fittings and a sheltered mounting spot help the installation last.

Hurricane season adds one more consideration. Surges from lightning and from the grid can damage charging equipment along with everything else in the house. Whole-home surge protection at the panel is a sensible add-on that protects the charger and the rest of your electronics at the same time.

Can I install an EV charger in a condo or HOA community?

If you live in a condo or an HOA community, check the association’s rules and approval process before scheduling an installation. Shared garages and parking areas often involve common electrical rooms, metering questions and board approval, and getting those answers early keeps the project moving.

Why hire a licensed electrician for an EV charger?

An EV charger is a high-power load that runs for hours, and mistakes in wire size, breaker size or connections can overheat equipment. A licensed electrical contractor sizes the circuit correctly, follows the Florida Building Code and the National Electrical Code, and handles the permit and inspection where required. A permitted installation is also documented, which can matter for insurance and when you sell the home.

Who installs EV chargers in Palm Beach County?

K&J Electrical Solutions does. We are a family-owned, owner-operated electrician in Palm Beach County, run by Jake and Kevin, and the two of them do the work themselves. Tell us your vehicle, the charger you want and where you park, and we will check your panel before quoting. We work across the county, including Jupiter, Palm Beach Gardens, Wellington, Boca Raton, Royal Palm Beach and Palm Beach. Our phone is answered 24/7 at (561) 777-9982, or you can request an estimate.

EV Charger Installation Questions

What kind of EV charger should I install at home?

Most homeowners choose a Level 2 charger, which runs on a 240-volt circuit and charges far faster than a standard outlet. You can pick a hardwired unit or a plug-in charger on a NEMA 14-50 outlet. K&J Electrical Solutions installs either and sizes the circuit to your charger and your vehicle.

Can my electrical panel handle an EV charger?

It depends on your panel's size and how much of it your air conditioning, pool equipment and appliances already use. K&J Electrical Solutions does a load calculation before installing a charger. If capacity is tight, options include a lower charging setting, a load management device or a panel upgrade that adds headroom.

Do I need a permit to install an EV charger in Florida?

Usually, yes. Adding a new 240-volt circuit for an EV charger typically requires an electrical permit from your city or county building department, followed by an inspection. K&J Electrical Solutions is a licensed Florida electrical contractor and handles permitted work where required, so your installation is inspected and documented.

Can an EV charger be installed outdoors in Florida?

Yes. Driveway and carport chargers are common in Florida, using chargers, outlets and fittings built for outdoor use with proper weather covers. Near the coast, salt air makes corrosion-resistant equipment and sealed connections especially important. K&J Electrical Solutions can help you choose a spot where the cable reaches your charging port easily.

How much does EV charger installation cost?

Cost depends on the charger you choose, the distance from your panel to where you park, whether the panel has room for a new circuit, and permit requirements. K&J Electrical Solutions gives free quotes after looking at your setup. Call (561) 777-9982 or request a quote online; phones are answered 24/7.

Still have a question? Ask the owners directly.

Need help right now?

Call or text (561) 777-9982. We answer 24/7, and you get Jake or Kevin, not a call center.

Power out, burning smell, sparking outlet or a breaker that won't reset? Call now.

Not urgent? Request a free estimate.

We typically reply within one business hour.

* Required. We only use your details to answer your request.

Other ways to reach us

K&J Electrical Solutions logo

K&J Electrical SolutionsBoynton Beach, FL

Open our Facebook page Recommend us on Nextdoor
Address
K&J Electrical Solutions
9377 Longmeadow Cir, Boynton Beach, FL 33436
Service area
Palm Beach County, FL
License
Licensed and insured Florida electrical contractor EC13016308
K&J Electrical Solutions logo

We Answer 24/7

Need an electrician? Jake or Kevin picks up, day or night.

Emergency service
24/7, every day
Service area
Palm Beach County
FL license
EC13016308
Call (561) 777-9982