Skip to content

How Much Does a Panel Upgrade Cost in Palm Beach County?

Short answer

National cost guides (HomeAdvisor and This Old House, 2026 estimates) put a 200-amp panel replacement at roughly $1,300 to $3,000 installed. Your price depends on the panel size, the meter and service wires, permits and what the inspection turns up, so treat these as ballpark figures and get an on-site quote.

License EC13016308 Answered 24/7

Updated , by K&J Electrical Solutions, a family-owned electrician in Palm Beach County. General information, not a quote; your home may differ.

What does a panel upgrade cost on average?

HomeAdvisor’s 2026 data puts the national average at about $1,347, with most homeowners paying between $518 and $2,193. That range includes smaller jobs; a full 200-amp panel replacement usually lands higher.

Panel size HomeAdvisor (updated June 2026) This Old House (updated March 2026)
100 amps $800 to $1,500 $800 to $1,500
150 amps $1,300 to $1,600 not listed
200 amps $1,300 to $2,000 $1,300 to $3,000
400 amps $2,000 to $4,000 $2,000 to $4,000

These are national estimates for a panel plus installation, not K&J prices. HomeAdvisor’s figures don’t include rewiring, and it adds about $150 to $300 for permits and drywall repair.

What does the permit cost in Palm Beach County?

It depends on who issues it. In unincorporated Palm Beach County, the Building Division’s fee schedule (printed March 2, 2026) lists $100 for an electrical change of service on a one- or two-family home, for example when the service size is upgraded. Cities such as West Palm Beach, Boca Raton and Jupiter run their own building departments and set their own fees; national guides put permits at roughly $50 to $300.

What makes a panel upgrade cost more?

Most of the difference between a simple swap and a bigger job comes from the work around the panel:

  • Raising the service size, for example from 100 to 200 amps, which can mean a new meter base and service wires and coordination with FPL (or the city utility in Lake Worth Beach)
  • Moving the panel to a new location
  • Grounding and bonding that has to be brought up to current code
  • Corrosion on outdoor meter bases and disconnects near the ocean or the Intracoastal
  • Damaged wiring around an old Federal Pacific or Zinsco panel
  • Extras done at the same time, such as new circuits, whole-home surge protection or a generator inlet
  • Patching drywall or stucco after the work

A same-size replacement in the same spot, with good wiring and easy access, is the simplest version of the job.

Why can Palm Beach County jobs differ from national averages?

National averages blend every market, and local homes have their own factors. Air conditioning runs most of the year here, often alongside a pool pump, so many homes need more capacity than the same house would up north. Some insurers ask about older panel brands, coastal air wears out outdoor equipment, and permitted work has to pass a local inspection.

Is a panel upgrade worth it?

Yes, if breakers trip often, the panel is full, your insurer flagged it, or you’re adding an EV charger, a pool, a generator or another AC unit. A new panel adds capacity and room for what’s next, and a permitted, inspected upgrade is documented for insurance and resale. More on panel upgrades.

How do I get an exact price?

Get an on-site quote. We look at the panel, the meter and service, and what you plan to add, then run a load calculation, so the number covers your actual home. Quotes are free; call (561) 777-9982 or request one online.

Sources

  • HomeAdvisor, electrical panel upgrade cost guide, updated June 17, 2026: homeadvisor.com
  • This Old House, cost to upgrade an electrical panel, updated March 31, 2026: thisoldhouse.com
  • Palm Beach County Building Division fee schedule, printed March 2, 2026: discover.pbc.gov

More Questions

Is replacing a few breakers cheaper than a panel upgrade?

Yes, but it only makes sense when the panel itself is sound, has room and isn't a brand insurers flag. If the panel is undersized, corroded, or a Federal Pacific or Zinsco, swapping breakers doesn't solve the problem.

Does homeowners insurance pay for a panel upgrade?

Usually not. Policies generally cover sudden damage, not upgrades or wear. If a covered event such as a lightning strike damaged the panel, ask your insurer.

How long does a panel upgrade take?

The install is usually done in a day, with the power off for part of it. HomeAdvisor estimates about 4 to 8 hours of labor for a typical upgrade; permits, inspection and any utility work add time before and after.

Want a straight answer for your own home? Call the owners.

Need help right now?

Call or text (561) 777-9982. We answer 24/7, and you get Jake or Kevin, not a call center.

Power out, burning smell, sparking outlet or a breaker that won't reset? Call now.

Not urgent? Request a free estimate.

We typically reply within one business hour.

* Required. We only use your details to answer your request.

Other ways to reach us

K&J Electrical Solutions logo

K&J Electrical SolutionsBoynton Beach, FL

Open our Facebook page Recommend us on Nextdoor
Address
K&J Electrical Solutions
9377 Longmeadow Cir, Boynton Beach, FL 33436
Service area
Palm Beach County, FL
License
Licensed and insured Florida electrical contractor EC13016308