Skip to content

Whole-Home Surge Protection in Palm Beach County

K&J Electrical Solutions installs whole-home surge protectors at the electrical panel for homes across Palm Beach County. A panel-mounted surge protector helps shield your air conditioner, appliances and electronics from lightning and grid surges, and works best alongside plug-in protectors. Family-owned and owner-operated.

License EC13016308 Answered 24/7

What's Included

Every surge protection job covers these 6 points, done by Jake or Kevin themselves.

  • Surge protective device (SPD) installed at the main panel
  • Choice between Type 1 and Type 2 devices based on your service
  • Correct breaker, short wiring leads and proper grounding connection
  • Point-of-use protection for sensitive equipment where it makes sense
  • Check of panel condition and grounding before installation
  • Permit and inspection where required

Signs You Need It

If you notice any of these, it is time to call about surge protection.

  • Electronics or appliances failed after a storm or outage
  • AC control boards or pool equipment have been replaced after lightning
  • Your area gets frequent summer thunderstorms and nearby strikes
  • Lights or equipment act up when power returns after an outage
  • You have expensive electronics, a home office or smart-home gear

Ready to talk about surge protection? You'll deal with Jake or Kevin directly.

What does whole-home surge protection do?

Whole-home surge protection is a device at your main panel that clamps down on voltage spikes before they travel through every circuit in the house. Electrical equipment is built for a normal voltage range, and a short spike far above it can damage circuit boards in ways you may not notice at first. A surge protective device, or SPD, gives that excess energy somewhere else to go.

It is not a battery or a backup. It simply shields the wiring downstream of the panel, which means your air conditioner, refrigerator, TVs, computers and chargers all share one layer of defense.

Why do Florida homes need surge protection?

Florida has some of the most frequent thunderstorms in the country, and lightning does not need to hit your house to hurt it. A strike on a nearby line, tree or transformer can push a surge into the neighborhood’s wiring. Air conditioning systems, with their electronic control boards and compressors, are among the most costly pieces of equipment at risk.

Hurricane season adds another source. When the electric utility restores power after an outage, switching on the grid can send spikes along the lines. Coastal homes also tend to run more electronics and outdoor equipment such as pool controls, which are exposed to storms.

What is the difference between Type 1, Type 2 and plug-in protection?

Surge protection works best in layers, with the heaviest device at the panel and smaller ones at the equipment. A Type 1 SPD connects on the line side of the main breaker, while a Type 2 connects on the load side. The right choice depends on your service and how the panel is arranged, and an electrician can tell you which applies.

Point-of-use protectors, such as plug-in strips or outlet-level devices, help with surges generated inside the home and protect specific equipment like computers and entertainment systems. They complement the panel device rather than replace it.

What happens during a surge protector installation?

A surge device installation is usually a short job, but placement and wiring matter. The device is mounted at or beside the panel and connected with leads that are as short and straight as possible, since long wires reduce how well it works. It needs a proper breaker and a good grounding connection.

That is why the panel is checked first. If the panel is outdated, corroded or poorly grounded, you may be better served by panel upgrades and adding the surge device at the same time. Many surge protective devices have indicator lights that show whether they are still working, since they can wear out after absorbing large events.

What can’t a surge protector do?

No surge device can promise protection from a direct lightning strike, and it will not prevent every failure. What it does is reduce the odds and severity of damage from the far more common nearby strikes and grid events. It works alongside good grounding and, for outages, a generator if you want to keep power on.

If something already seems wrong after a storm, such as outlets that no longer work or a buzzing panel, see electrical repair first.

What else protects my electrical system?

Surge protection is most effective when it fits into a broader plan for your electrical system. If you are adding a generator, an EV charger or pool equipment, the panel work for those projects is a good time to add a surge device too, because the panel is already open and the breaker space is being planned.

It also helps to know what is plugged in where. Homes with a home office, a media room or a lot of smart devices gain from extra point-of-use protection near that equipment. An electrician can walk through the house with you and point out where the weak spots are, so you spend protection where it counts.

Who installs whole-home surge protection in Palm Beach County?

K&J Electrical Solutions does. We are a family-owned, owner-operated electrician in Palm Beach County, run by Jake and Kevin, and the two of them do the work themselves. Most installs take a short visit at the panel, and it is a natural add-on to a panel upgrade or generator hookup. We work across the county, including West Palm Beach, Lake Worth Beach, Boynton Beach, Delray Beach, Riviera Beach and Palm Beach. Our phone is answered 24/7 at (561) 777-9982, or you can request an estimate.

Surge Protection Questions

What is whole-home surge protection?

Whole-home surge protection is a surge protective device installed at your electrical panel that diverts excess voltage away from your home's wiring. It helps protect AC equipment, appliances and electronics from lightning and grid surges. K&J Electrical Solutions installs these devices throughout Palm Beach County.

What is the difference between Type 1 and Type 2 surge protection?

Both are surge protective devices, but they are installed in different places. Type 1 connects on the line side of the main breaker, while Type 2 connects on the load side, at the panel. Which one fits depends on your service. K&J Electrical Solutions can recommend the right device.

Do I still need plug-in surge protectors?

Often yes. A panel-mounted device handles large surges coming in from outside, while point-of-use protectors guard sensitive electronics against smaller surges generated inside the home. Using both layers gives better coverage. K&J Electrical Solutions can suggest where point-of-use protection is worthwhile in your home.

Can surge protection stop lightning damage completely?

No device can promise that. A direct lightning strike can overwhelm any protection. But a surge protective device at the panel helps reduce the damage from nearby strikes and grid surges, which are the more common events in Florida. K&J Electrical Solutions will explain what it can and cannot do.

Why do surges happen after Florida storms?

Surges come from lightning, but also from the electric utility switching power on and off as it restores service after storms. That sudden return of power can send a voltage spike into your home. A whole-home device helps protect equipment through both events. Call (561) 777-9982 to ask K&J Electrical Solutions.

Still have a question? Ask the owners directly.

Need help right now?

Call or text (561) 777-9982. We answer 24/7, and you get Jake or Kevin, not a call center.

Power out, burning smell, sparking outlet or a breaker that won't reset? Call now.

Not urgent? Request a free estimate.

We typically reply within one business hour.

* Required. We only use your details to answer your request.

Other ways to reach us

K&J Electrical Solutions logo

K&J Electrical SolutionsBoynton Beach, FL

Open our Facebook page Recommend us on Nextdoor
Address
K&J Electrical Solutions
9377 Longmeadow Cir, Boynton Beach, FL 33436
Service area
Palm Beach County, FL
License
Licensed and insured Florida electrical contractor EC13016308
K&J Electrical Solutions logo

We Answer 24/7

Need an electrician? Jake or Kevin picks up, day or night.

Emergency service
24/7, every day
Service area
Palm Beach County
FL license
EC13016308
Call (561) 777-9982